Rubicon is Intuitiv’s on-panel interface for legacy Crestron systems — written natively in VT Pro and SmartGraphics for TPS-class panels. The same design discipline that produced Tahoe, on the technology generation that came before it. Composed for the room, not configured from a template.
Rubicon remains available for purchase. It exists for residences that are keeping their VT Pro panel infrastructure in service and want the household-facing surface to reflect the architecture rather than the manufacturer’s default. When a residence is ready to refresh its panels, the design language carries cleanly forward to Tahoe.
Rubicon is the interface; VT Pro is the toolchain it’s composed in. The distinction matters when an architect or AV consultant is reading a Crestron schedule and trying to understand what’s being specified.
Rubicon is written natively in Crestron VT Pro — the prior-generation graphics toolchain that targets the TPS-class panels. SmartGraphics is the framework within VT Pro we use to compose typography, palette, motion, and tile behaviour. It is real Crestron code, written by senior engineers, not a third-party wrapper.
Rubicon runs on the Crestron TPS family — the touchpanels that preceded the current TSW and TS series. Many residences built five to fifteen years ago are still operating these panels well, and Rubicon exists so those residences are not forced into a panel refresh to receive a properly composed interface.
Hand-composed scene language. Typography drawn against the architecture. Palette pulled from the project’s materials. Motion timings tuned to the panel hardware’s actual response. The visible result on a Rubicon residence and a Tahoe residence carries the same firm voice; the underlying technology is the only thing that differs.
Rubicon is the right answer in a narrow set of circumstances. Outside those, Tahoe — written in Crestron CH5 for current TSW and TS panels — is the modern path.
Residences with VT Pro panels in service. If a property was built five to fifteen years ago around the TPS family and the panels are still operating cleanly, there is no architectural reason to replace them. Rubicon brings the on-panel surface up to the standard the rest of the residence already meets.
Households not ready for a panel refresh. Replacing every touchpanel in a fully built-out residence is invasive — bezel work, drywall, sometimes joinery. Rubicon lets the household defer that scope until it’s the right moment, while still receiving a properly composed interface in the meantime.
Audit-and-remediate engagements on inherited systems. Many residences come to us with a previous integrator’s VT Pro work in place — functional but visually undisciplined. Rubicon is what those residences become after the audit: same hardware, same wiring, same scene engine; a different surface entirely.
Rubicon and Tahoe are the same design language on different technology generations. A residence that starts on Rubicon and later refreshes its panels does not start over — the scene library, the typography, the palette, the household’s established interaction patterns all carry forward.
Panel refresh as a planned event. When the household is ready to refresh its touchpanels, we plan the transition during the next maintenance window. The new TSW or TS panels are pre-loaded with Tahoe in the same design language; commissioning is a weekend, not weeks.
No design rework. The composition that was authored for Rubicon — tile arrangement, scene names, motion, typography — is what the household has learned. Tahoe inherits that composition; the surface changes hardware, not vocabulary.
Continuity through the life of the residence. The senior engineer attached to the residence stays with it across the transition. The same firm that wrote Rubicon writes Tahoe. The household never deals with a handover.
Rubicon is engagement-based, like every interface this firm ships. The fee is set against the scope of the residence and the depth of involvement, independent of any hardware in the rack.
Scope drivers. The number of panels, the number of rooms, the complexity of the scene library, whether we’re working from an existing VT Pro programme or composing from scratch, and whether the residence has a single household pattern or several. Most engagements settle within a predictable range once we’ve read the schedule.
How to begin. A short written brief is enough. Where panels are listed in the schedule, the size of the residence, the household pattern, and whether there is an existing Crestron programme we’re refining or replacing. We respond personally within two business days and scope from the drawings.
Questions that come up most often from architects, integrators, and design teams considering Rubicon for a residence on legacy Crestron infrastructure.
Rubicon is Intuitiv’s on-panel interface for legacy Crestron systems — hand-composed in Crestron VT Pro and SmartGraphics, written natively for TPS-class panels. It is the legacy counterpart to Tahoe, which targets current-generation TSW and TS panels via Crestron CH5.
Yes. Rubicon remains available for residences keeping their existing VT Pro panel infrastructure in service. The product is being phased out alongside the panel generation it runs on — not before. New residences and panel-refresh projects should specify Tahoe.
The Crestron TPS family — the touchpanels that preceded the current TSW and TS series. If the project schedule specifies current-generation TSW or TS panels, Tahoe on Crestron CH5 is the right product.
Yes, when the panels are refreshed. The design language — typography, palette, scene library, household interaction patterns — carries across from Rubicon to Tahoe. Commissioning the new panels takes a weekend, not weeks, because the composition is already authored.
Engagement-based, like every interface we ship. Scope depends on the residence — the number of panels and rooms, the complexity of the scene library, and whether we’re refining an existing VT Pro programme or composing from scratch. Request a consultation and we’ll scope it from the drawings.
Only if the residence is on VT Pro panels and isn’t ready for a panel refresh. Rubicon exists to give those residences the same hand-composed design standard that Tahoe brings to current-generation panels. Anything new should specify Tahoe.
A short written brief is enough to begin. We respond personally within two business days, and can scope the engagement from the drawings or the existing Crestron schedule.
Request a Rubicon spec → Open the Tahoe page · Custom Crestron UI (CH5) · Custom Crestron programming